Huntsman Building Solutions Heatlok® HFO High Lift Closed-Cell Spray Foam Insulation Set (HS200-00WDU)
Heatlok HFO High Lift Closed-Cell Spray Foam Insulation
Heatlok® HFO High Lift is a closed-cell spray foam insulation formulated to deliver an aged R-value of about 7.4 per inch while allowing up to a 6.5 in. lift per pass to help meet ceiling code faster. It leverages Honeywell Solstice® HFO technology for ultra-low global warming potential and is designed for strong adhesion, good yield, and efficient application.
Key Features:
- High R-Value Performance: Aged thermal resistance of ~R-7.4 per inch (depending on installed thickness).
- High-Lift Application: Sprays up to 6.5 in. per pass to reduce labor time and speed code compliance.
- Moisture & Vapor Control: Tested WRB performance and functions as a Class II vapor retarder at 2 in. thickness.
- Code & Resiliency Credentials: NFPA 285 tested behind multiple claddings and meets FEMA Class 5 flood damage resistance requirements.
- Low-Impact Formulation: Uses Solstice® HFO blowing agent technology (GWP 1) and is GREENGUARD Gold certified (low VOC).
Please check the Product Data Sheet Here
Specifications Table:
| Specification | Details |
|---|---|
| Product name | HEATLOK HFO HIGH LIFT |
| Insulation type | Closed-cell spray foam insulation |
| Aged thermal resistance (R-value) | 7.4 per inch (depending on installed thickness) |
| Maximum lift per pass | 6.5 in. |
| Vapor retarder rating | Class II vapor retarder at 2 in. thickness |
| Water-resistive barrier (WRB) | Tested water-resistant barrier (WRB) |
| NFPA 285 | Tested and approved behind multiple claddings |
| GREENGUARD certification | GREENGUARD Gold Certified (low VOC) |
| ASTM C1029 | Type II (~25 psi) |
| FEMA flood damage resistance | Meets Class 5 FEMA (Flood Damage Resistance Requirements) |
| ABAA | ABAA evaluated |
| Blowing agent technology | Honeywell Solstice® HFO Liquid Blowing Agent technology |
| Global warming potential (GWP) | 1 (per manufacturer description) |
| Application temperature range | 15–100°F (-9–38°C) |
| Estimated yield | 4500–5000 bd. ft. per set |
| ASTM E84 flame spread index | 1 |
Frequently Asked Questions (FAQ):
Q: What R-value does Heatlok HFO High Lift provide?
A: It provides an aged thermal resistance of approximately R-7.4 per inch (depending on installed thickness).
Q: How thick can I spray in one pass?
A: Up to a maximum 6.5 in. lift per pass.
Q: Is it considered a vapor retarder?
A: Yes—at 2 in. thickness it is listed as a Class II vapor retarder.
Q: What temperature range can it be applied in?
A: 15–100°F (-9–38°C).
Q: What makes it more environmentally friendly than traditional closed-cell foam?
A: It leverages Solstice® HFO blowing agent technology with a GWP of 1 (99.9% lower than traditional blowing agents, per the manufacturer description).
Invisible insulation, unmistakable comfort.
Think of Heatlok® HFO High Lift as the quiet architecture behind a beautifully finished room—sealing, insulating, and elevating comfort without asking for attention. Its standout advantage is the high-lift application, letting performance build quickly while supporting a cleaner, more efficient envelope. Use it to create calm, consistent temperatures in vaulted ceilings or unvented attic conversions where comfort can feel elusive. It’s the kind of behind-the-walls upgrade that makes everyday living feel effortlessly luxe.
Upgrade your building envelope with Heatlok® HFO High Lift for faster high-R insulation and a tighter, more resilient seal.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Huntsman Building Solutions Heatlok® HFO High Lift Closed-Cell Spray Foam Insulation Set (HS200-00WDU)
Huntsman Building Solutions Heatlok® HFO High Lift Closed-Cell Spray Foam Insulation Set (HS200-00WDU)
Heatlok HFO High Lift Closed-Cell Spray Foam Insulation
Heatlok® HFO High Lift is a closed-cell spray foam insulation formulated to deliver an aged R-value of about 7.4 per inch while allowing up to a 6.5 in. lift per pass to help meet ceiling code faster. It leverages Honeywell Solstice® HFO technology for ultra-low global warming potential and is designed for strong adhesion, good yield, and efficient application.
Key Features:
- High R-Value Performance: Aged thermal resistance of ~R-7.4 per inch (depending on installed thickness).
- High-Lift Application: Sprays up to 6.5 in. per pass to reduce labor time and speed code compliance.
- Moisture & Vapor Control: Tested WRB performance and functions as a Class II vapor retarder at 2 in. thickness.
- Code & Resiliency Credentials: NFPA 285 tested behind multiple claddings and meets FEMA Class 5 flood damage resistance requirements.
- Low-Impact Formulation: Uses Solstice® HFO blowing agent technology (GWP 1) and is GREENGUARD Gold certified (low VOC).
Please check the Product Data Sheet Here
Specifications Table:
| Specification | Details |
|---|---|
| Product name | HEATLOK HFO HIGH LIFT |
| Insulation type | Closed-cell spray foam insulation |
| Aged thermal resistance (R-value) | 7.4 per inch (depending on installed thickness) |
| Maximum lift per pass | 6.5 in. |
| Vapor retarder rating | Class II vapor retarder at 2 in. thickness |
| Water-resistive barrier (WRB) | Tested water-resistant barrier (WRB) |
| NFPA 285 | Tested and approved behind multiple claddings |
| GREENGUARD certification | GREENGUARD Gold Certified (low VOC) |
| ASTM C1029 | Type II (~25 psi) |
| FEMA flood damage resistance | Meets Class 5 FEMA (Flood Damage Resistance Requirements) |
| ABAA | ABAA evaluated |
| Blowing agent technology | Honeywell Solstice® HFO Liquid Blowing Agent technology |
| Global warming potential (GWP) | 1 (per manufacturer description) |
| Application temperature range | 15–100°F (-9–38°C) |
| Estimated yield | 4500–5000 bd. ft. per set |
| ASTM E84 flame spread index | 1 |
Frequently Asked Questions (FAQ):
Q: What R-value does Heatlok HFO High Lift provide?
A: It provides an aged thermal resistance of approximately R-7.4 per inch (depending on installed thickness).
Q: How thick can I spray in one pass?
A: Up to a maximum 6.5 in. lift per pass.
Q: Is it considered a vapor retarder?
A: Yes—at 2 in. thickness it is listed as a Class II vapor retarder.
Q: What temperature range can it be applied in?
A: 15–100°F (-9–38°C).
Q: What makes it more environmentally friendly than traditional closed-cell foam?
A: It leverages Solstice® HFO blowing agent technology with a GWP of 1 (99.9% lower than traditional blowing agents, per the manufacturer description).
Invisible insulation, unmistakable comfort.
Think of Heatlok® HFO High Lift as the quiet architecture behind a beautifully finished room—sealing, insulating, and elevating comfort without asking for attention. Its standout advantage is the high-lift application, letting performance build quickly while supporting a cleaner, more efficient envelope. Use it to create calm, consistent temperatures in vaulted ceilings or unvented attic conversions where comfort can feel elusive. It’s the kind of behind-the-walls upgrade that makes everyday living feel effortlessly luxe.
Upgrade your building envelope with Heatlok® HFO High Lift for faster high-R insulation and a tighter, more resilient seal.
Original: $305.55
-70%$305.55
$91.67Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Heatlok HFO High Lift Closed-Cell Spray Foam Insulation
Heatlok® HFO High Lift is a closed-cell spray foam insulation formulated to deliver an aged R-value of about 7.4 per inch while allowing up to a 6.5 in. lift per pass to help meet ceiling code faster. It leverages Honeywell Solstice® HFO technology for ultra-low global warming potential and is designed for strong adhesion, good yield, and efficient application.
Key Features:
- High R-Value Performance: Aged thermal resistance of ~R-7.4 per inch (depending on installed thickness).
- High-Lift Application: Sprays up to 6.5 in. per pass to reduce labor time and speed code compliance.
- Moisture & Vapor Control: Tested WRB performance and functions as a Class II vapor retarder at 2 in. thickness.
- Code & Resiliency Credentials: NFPA 285 tested behind multiple claddings and meets FEMA Class 5 flood damage resistance requirements.
- Low-Impact Formulation: Uses Solstice® HFO blowing agent technology (GWP 1) and is GREENGUARD Gold certified (low VOC).
Please check the Product Data Sheet Here
Specifications Table:
| Specification | Details |
|---|---|
| Product name | HEATLOK HFO HIGH LIFT |
| Insulation type | Closed-cell spray foam insulation |
| Aged thermal resistance (R-value) | 7.4 per inch (depending on installed thickness) |
| Maximum lift per pass | 6.5 in. |
| Vapor retarder rating | Class II vapor retarder at 2 in. thickness |
| Water-resistive barrier (WRB) | Tested water-resistant barrier (WRB) |
| NFPA 285 | Tested and approved behind multiple claddings |
| GREENGUARD certification | GREENGUARD Gold Certified (low VOC) |
| ASTM C1029 | Type II (~25 psi) |
| FEMA flood damage resistance | Meets Class 5 FEMA (Flood Damage Resistance Requirements) |
| ABAA | ABAA evaluated |
| Blowing agent technology | Honeywell Solstice® HFO Liquid Blowing Agent technology |
| Global warming potential (GWP) | 1 (per manufacturer description) |
| Application temperature range | 15–100°F (-9–38°C) |
| Estimated yield | 4500–5000 bd. ft. per set |
| ASTM E84 flame spread index | 1 |
Frequently Asked Questions (FAQ):
Q: What R-value does Heatlok HFO High Lift provide?
A: It provides an aged thermal resistance of approximately R-7.4 per inch (depending on installed thickness).
Q: How thick can I spray in one pass?
A: Up to a maximum 6.5 in. lift per pass.
Q: Is it considered a vapor retarder?
A: Yes—at 2 in. thickness it is listed as a Class II vapor retarder.
Q: What temperature range can it be applied in?
A: 15–100°F (-9–38°C).
Q: What makes it more environmentally friendly than traditional closed-cell foam?
A: It leverages Solstice® HFO blowing agent technology with a GWP of 1 (99.9% lower than traditional blowing agents, per the manufacturer description).
Invisible insulation, unmistakable comfort.
Think of Heatlok® HFO High Lift as the quiet architecture behind a beautifully finished room—sealing, insulating, and elevating comfort without asking for attention. Its standout advantage is the high-lift application, letting performance build quickly while supporting a cleaner, more efficient envelope. Use it to create calm, consistent temperatures in vaulted ceilings or unvented attic conversions where comfort can feel elusive. It’s the kind of behind-the-walls upgrade that makes everyday living feel effortlessly luxe.
Upgrade your building envelope with Heatlok® HFO High Lift for faster high-R insulation and a tighter, more resilient seal.
